CNCFM.R
New product
CNC Racing F.M Race Tomos A35 , A5 -1 or 2 gear
In Stock
Warning: Last items in stock!
Availability date: 11/30/2017
By buying this product you can collect up to 18 loyalty points. Your cart will total 18 loyalty points that can be converted into a voucher of 1,80 €.
CNC Racing F.M Race Tomos A35 , A5 -1 or 2 gear
CNC Racing F.M Race Tomos A35 , A5 -1 or 2 gear
Recipient :
* Required fields
or Cancel
Finally one new product from the F.M Racing team.
Great Clutch because you can use it for 1 or 2 gear , plug & play !
You can install only 1 gear , 2 gear you can leave stock if you don't have more than 50ccm or 65ccm it is your choise
If you use in 1 and 2 clutch same clutch "color " you must release the throttle and add it again (you have to know that 2nd gear spins slower so in 2nd gear there should be a little bit softer springs but not too much ). when engine want to change gear
If you have too hard springs in 2 clutches, the gearbox will not shift.
If you have soft springs in 1 gear and hard springs in 2 gears, the engine will start as standard from 2nd gear
Ideal for use on all Tomos A35 / A5 conversions from 50 to 74cc. We also tested the CNC clutch ourselves and it is top notch. Best results get with inner ignitions like PVL ,HPI,Selettra ...
This set sells only (3x clutch blades made of CNC aluminum) without core as well as without springs.
You can insert any clutch spring scooter into the clutch. Which is great because you can control when the moped will start, as well as shift into 2nd gear.
It all depends on the set (hardness) of the spring and the speed.
Springs are used by Scooters Piaggio / Minarelli
Recommended for 50cc conversions and original ignition
1-gear - Soft
2-gear - Soft
Recommended for 65cc conversions with inner rotor
1-gear -Medium (Malossi Yellow / White / Black )
2-gear soft (Malossi Yellow / White /Black )
The moped starts at approx. 7000rpm and shifts to 10000rpm. When it starts depends on several factors: lining thickness, lining (friction), preloads, driver weight, gears ratio, oil ...
Recommended for 74ccm conversions with inner rotor
1-gear - Hard (Stage6 / Polini / Malossi)
2-gear -Medium (Stage6, Polini / Malossi)
Spring list :
- RPP.13379/245.030 Polini
- RPNK900.42 Naraku
- RPM.297454 Malossi
You can use springs by your choise or your favorite brand.
Shifting also depends on the oil change, only a minimum of 2.3 dcl of oil in the gearbox can be used for better traction grip!
The total weight of the assembled clutch (with springs, slats and insert is 215 gr)
2stroke
Best clutch i tested alot of them, top quality i have both gears from you
1
Zanima me kje dobiti "štifte" ki povezujejo sklopko z zobnikom. lp
Jaka
Odlične sklopke , kvaliteten materjal vozimo jih že 2 leti na tekmah po sloveniji ni obrabe , ultra lahke !
priporočam za vse tiste ki želijo dodatno moč in pospešek ter višje obrate med prestavlanjem motorja
Fuel hause Black 1m
3,19 €
Manual choke for Dellorto carburetor
10,50 €
Carburator Dellorto PHBG 19 DS Dellorto tuning...
97,00 €
Sticker Tomos - 100mm
6,10 €
Cylinder kit AIRSAL Tomos A35 , A5 , Colibri...
95,00 €
Spring transmission gears Tomos A3 /A35 /A5 or.
1,05 €
Clutch plates Racing- Tomos -...
150,00 €
1,40 €
Main jet set M5 Dellorto size 70-88 - 10 pcs
17,99 €
Gasket set Tomos Colibri A5 , A55
7,00 €