RP171.0555
Novi proizvod
Ignition Polini digitalni PVL za Minarelli AM6, Derbi D50B, Minarelli horizontal
Dostupno za 5-7 dana
Pažnja: Posljednji artikli na stanju!
Datum dostupnosti:
Kupnjom ovog proizvoda možete prikupiti do 43 bodovi lojalnosti. Vaša košarica će ukupno 43 bodovi lojalnosti koja se može pretvoriti u voucher 4,30 €.
Ignition Polini digitalni PVL za Minarelli AM6, Derbi D50B, Minarelli horizontal
Ignition Polini digitalni PVL za Minarelli AM6, Derbi D50B, Minarelli horizontal
Primatelj :
* Obvezna polja
ili Poništi
Ignition Polini digitalni PVL za Minarelli AM6, Derbi D50B, Minarelli horizontal
The ignition advance is the adjustment curve programmed in the control unit and shifts depending on the engine speed. The ignition advance is based on the mechanical advance. That means: a shift in the mechanical adjustment also shifts the ignition advance. Moving the mechanical feed also shifts the ignition feed. The mechanical adjustment is 33 degrees before TDC, the ignition adjustment shifts by 17 degrees before TDC at 15000 rpm, so the adjustment falls to 16 degrees before TDC. If it is set to 31 degrees, the result is 14 degrees at 15,000 rpm. If you set it to 35 degrees before TDC, you get 18 degrees before TDC at 15,000 rpm and so on. Optimal motor operation depends almost entirely on a successful installation with the correct fixed angle. Included: Stator mounting plate stator rotor Kitchen sink CDI (ignition curve with electronic advance ignition) Table with a list of presets and a diagram